menu
Mahmoud Nili Ahmadabadi

Professor

Update: 2024-12-28

Mahmoud Nili Ahmadabadi

College of Engineering / Metallurgy and Materials Engineering

Journal Paper

  1. "Enhanced deformability of WE43 magnesium alloy by activation of non-basal slip and twinning deformation modes in the equal channel angular pressing at room temperature"
    Milad Daghigh, Maryam Mohri, Hossein Ghanbari, Mahmoud Nili Ahmadabadi
    MATERIALS LETTERS, Vol. 351, No 351, 2023
  2. "Significance of adiabatic heating on phase transformation in titanium-based alloys during severe plastic deformation"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Hyoung Seop Kim, Terence G. Langdon
    MATERIALS CHARACTERIZATION, Vol. 203, No 203, 2023
  3. "Significance of Mn concentration on aging behavior, microstructure evolution and mechanical properties of Fe–Ni–Mn alloys"
    Novin Rasooli Rasooli, Hassan Shirazi, Mahmoud Nili Ahmadabadi
    Journal of Materials Research and Technology-JMR&T, Vol. 24, No 24, pp.1-15, 2023
  4. "The effect of thermal and strain-induced aging on the mechanical behavior of room temperature ECAP processing of WE43 magnesium alloy"
    Milad Daghigh, Maryam Mohri, Hossein Ghanbari, Mahmoud Nili Ahmadabadi
    Journal of Materials Research and Technology-JMR&T, Vol. 24, No 24, pp.8508-8521, 2023
  5. "Effect of low-temperature precipitates on microstructure and pseudoelasticity of an Fe–Mn–Si-based shape memory alloy"
    Hesam Khodaverdi, Maryam Mohri, Amir Sabet Ghorabaei, Elyas Ghafoori, Mahmoud Nili Ahmadabadi
    MATERIALS CHARACTERIZATION, Vol. 195, No 195, 2023
  6. "Enhanced pseudoelasticity of an Fe–Mn–Si-based shape memory alloy by applying microstructural engineering through recrystallization and precipitation"
    Hesam Khodaverdi, Maryam Mohri, Elyas Ghafoori, Amir Sabet Ghorabaei, Mahmoud Nili Ahmadabadi
    Journal of Materials Research and Technology-JMR&T, Vol. 21, No 21, pp.2999-3013, 2022
  7. "Evaluation of texture weakening and microstructural evolution in an Fe–10Ni–7Mn martensitic steel severely deformed by six turns of high-pressure torsion"
    S.H. Mousavi Anijdan, H.R. Koohdar, Mahmoud Nili Ahmadabadi, H.R. Jafarian, Terence G. Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 851, No 851, 2022
  8. "Significant improvement in the thermal cycling stability of Ni44.8Ti45.8Hf5Cu5 shape memory alloy by high pressure torsion and post-deformation annealing"
    Sadjad Baradari, Natalia Resnina, Sergey Belyaev, Egor Prokofiev, Ruslan Z. Valiev, Mahmoud Nili Ahmadabadi
    Journal of Materials Research and Technology-JMR&T, Vol. 19, No 19, pp.2215-2224, 2022
  9. "Cyclic Stability of Ni44.8Cu5Ti45.2Hf5 and Zr-Substituted Ni44.8Cu5Ti40.2Hf5Zr5 Medium-Entropy Shape Memory Alloys"
    Sadjad Baradari, Natalia Resnina, Sergey Belyaev, Mahmoud Nili Ahmadabadi
    ADVANCED ENGINEERING MATERIALS, Vol. 24, No 10, pp.1-13, 2022
  10. "Upgrading of superior strength–ductility trade-off of CoCrFeNiMn high-entropy alloy by microstructural engineering"
    Mohammad Sajad Mehranpour, Hamed Shahmir, Peyman Asghari-rad, Mohammadreza Hosseinzadeh, Novin Rasooli, Hyoung Seop Kim, Mahmoud Nili Ahmadabadi
    Materialia, Vol. 22, No 101394, 2022
  11. "Structural evolution and thermal stability of functionally graded NiTi nano-glass thin films alloys during crystallization"
    Maryam Mohri, Farsad Forghani, Mahmoud Nili Ahmadabadi
    MATERIALS CHARACTERIZATION, Vol. 187, No 111850, 2022
  12. "Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes"
    Ali Heydarinia, Maryam Mohri, Peyman Asghari-rad, Hyoung Seop Kim, Mahmoud Nili Ahmadabadi
    Journal of Materials Research and Technology-JMR&T, Vol. 18, No 1, pp.147-158, 2022
  13. "Significance of Ti addition on precipitation in CoCrFeNiMn high-entropy alloy"
    Mohammad Sajad Mehranpour, Hamed Shahmir, Alireza Derakhshandeh, Mahmoud Nili Ahmadabadi
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 888, No 161530, 2021
  14. "Microstructure tailoring to enhance mechanical properties in CoCrFeNiMn high-entropy alloy by Ti addition and thermomechanical treatment"
    حامد شاهمیر , Mohammad Sajad Mehranpour, Alireza Derakhshandeh, Mahmoud Nili Ahmadabadi
    MATERIALS CHARACTERIZATION, Vol. 182, No 111513, 2021
  15. "Martensitic phase transformation and shape memory properties of the as-cast NiCuTiHf and NiCuTiHfZr alloys"
    Sadjad Baradari, Natalia Resnina, Sergey Belyaev, Mahmoud Nili Ahmadabadi
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 888, No 161534, 2021
  16. "Bulk NiTiCuCo shape memory alloys with ultra-high thermal and superelastic cyclic stability"
    Aslan Ahadi, Amir Sabet Ghorabaei, Hassan Shirazi, Mahmoud Nili Ahmadabadi
    SCRIPTA MATERIALIA, Vol. 200, No 1, 2021
  17. "Effects of prior austenite grain size and phase transformation temperature on bainitic ferrite formation in multi-constituent microstructures of a strong ultra-low-carbon steel"
    Amir Sabet Ghorabaei, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 815, No 1, 2021
  18. "Microstructural evolution and mechanical properties of CoCrFeNiMnTi x high‐entropy alloys"
    حامد شاهمیر , Alireza Derakhshandeh, brian Hallstedt, Mahmoud Nili Ahmadabadi
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 52, No 4, pp.441-451, 2021
  19. "Precipitation kinetics in heavily deformed CoCrFeNiMn high entropy alloy"
    Mohammad Sajad Mehranpour, حامد شاهمیر , Mahmoud Nili Ahmadabadi
    MATERIALS LETTERS, Vol. 288, No 1, 2021
  20. "Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation"
    حامد شاهمیر , Peyman Asghari-rad, Mohammad Sajad Mehranpour, Farsad Forghani, Hyoung Seop Kim, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 807, No 1, 2021
  21. "Phase evolution and mechanical properties of an intercritically-annealed Fe–10Ni–7Mn (wt. %) martensitic steel severely deformed by high-pressure torsion"
    Faezeh Javadzadeh Kalahroudi, حمیدرضا کوهدار , T.g Langdon, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 804, No 1, 2021
  22. "Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment"
    حمیدرضا کوهدار , Pouya Hakimipour, حمیدرضا جعفریان , T.g Langdon, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 804, No 1, 2021
  23. "The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy"
    حمیدرضا کوهدار , Mahmoud Nili Ahmadabadi, Faezeh Javadzadeh Kalahroudi, Hamidreza Jafarian, T.g Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 802, No 1, 2021
  24. "Microstructure and excess free volume of severely cold shape rolled CoCrFeNiMn high entropy alloy"
    حامد شاهمیر , Mohammad Sajad Mehranpour, Mahmoud Nili Ahmadabadi
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 840, No 1, 2020
  25. "CoCrFeNiMn high entropy alloy microstructure and mechanical properties after severe cold shape rolling and annealing"
    Mohammad Sajad Mehranpour, حامد شاهمیر , Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 793, No 1, 2020
  26. "On the microstructure and mechanical properties of a two-way shape memory NiTi/NiTiCu bi-layer diaphragm"
    Farzad GhaziAskari-Naeini, Milad Taghizadeh, MARYAM MOHRI, Mahmoud Nili Ahmadabadi
    MATERIALS & DESIGN, Vol. 188, No 188, 2020
  27. "Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe"
    Nazanin Forouzanmehr, Hamidreza Jafarian, Mohsen Samadi Khoshkhoo, Matthias Bonisch, Mahmoud Nili Ahmadabadi
    METALS AND MATERIALS INTERNATIONAL, Vol. 27, No 6, pp.1798-1807, 2020
  28. "Effect of Cu on Amorphization of a TiNi Alloy during HPT and Shape Memory Effect after Post‐Deformation Annealing"
    حامد شاهمیر , Mahmoud Nili Ahmadabadi, Mehdi Mohamadi, Yi Huang, Mariusz Andrezejczuk, Matgorzata Lawandowska, T.g Langdon
    ADVANCED ENGINEERING MATERIALS, Vol. 22, No 1, 2019
  29. "Development and Microstructural Characterization of a New Wrought High Entropy Superalloy"
    Ahad Shafiee, Mahmoud Nili Ahmadabadi, Hyoung Seop Kim, Mohammad Jahazi
    METALS AND MATERIALS INTERNATIONAL, Vol. 26, No 5, pp.591-602, 2019
  30. "Diffuse γ/γ′ interfaces in the hierarchical dual-phase nanostructure of a Ni-Al-Ti alloy"
    Farsad Forghani, Jongun Moon, Jong Chan Han, Reza Rahimi, Reza Abbaschian, Chan Gyung Park, Hyoung Seop Kim, Mahmoud Nili Ahmadabadi
    MATERIALS CHARACTERIZATION, Vol. 153, No 1, pp.284-293, 2019
  31. "On the nano-glass formation of the Ni–Ti thin films and related micro-structure and mechanical properties by controlling sputtering conditions"
    Maryam Mohry, Mahmoud Nili Ahmadabadi
    Materials Research Express, Vol. 6, No 7, 2019
  32. "On the control of structural/compositional ratio of coherent order-disorder interfaces"
    Farsad Forghani, Jong Chan Han, Jongun Moon, Reza Abbaschian, Chan Gyung Park, Hyoung Seop Kim, Mahmoud Nili Ahmadabadi
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 777, No 1, pp.1222-1233, 2019
  33. "Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy"
    Ahad Shafiee, Jongun Moon, Hyoung Seop Kim , Mohammad Jahazi, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 749, No 1, pp.271-280, 2019
  34. "On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion"
    Faezeh Javadzadeh Kalahroudi, Hamidreza Koohdar, Hamidreza Jafarian, T.g Langdon, Jurgen Scheffran, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 749, No 1, pp.27-34, 2019
  35. "Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures"
    Yalda Karimi, Siamak Hossein Nedjad, Mahmoud Nili Ahmadabadi, Hassan Shirazi, Hamed Zargari
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 736, No 1, pp.392-399, 2018
  36. "Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim, T.g Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 734, No 734, pp.445-452, 2018
  37. "Microstructure and mechanical properties of ultrafine-grained titanium processed by multi-pass ECAP at room temperature using core–sheath method"
    Alireza Derakhshandeh, Hamed Shahmir, Mahmoud Nili Ahmadabadi
    JOURNAL OF MATERIALS RESEARCH, Vol. 125, No 1, pp.1-9, 2018
  38. "Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Ahad Shafiee, Mariusz Andrzejczuk, T.g Langdon, Malgorzata Lewandowska
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 725, No 1, pp.196-206, 2018
  39. "Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Ahad Shafiee, T.g Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 718, No 1, pp.468-476, 2018
  40. "Microstructure evolution during austenite reversion in Fe-Ni martensitic alloys"
    Hassan Shirazi, G. Miyamoto, Siamak Hossein Nedjad, T. Chiba, Mahmoud Nili Ahmadabadi, Tadashi Furuhara
    ACTA MATERIALIA, Vol. 144, No 144, pp.269-280, 2018
  41. "Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film"
    Maryam Mohry, Milad Taghizadeh, Di Wang, Horst Hahn, Mahmoud Nili Ahmadabadi
    MATERIALS CHARACTERIZATION, Vol. 135, No 135, pp.317-324, 2018
  42. "On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography"
    Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, Hamidreza Jafarian, Tilak Bhattacharjee, Nobuhiro Tsuji
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 48, No 11, pp.5244-5257, 2017
  43. "Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process"
    Saeideh Mirab, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, Hamidreza Jafarian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 700, No 1, pp.416-424, 2017
  44. "Hardening and thermal stability of a nanocrystalline CoCrFeNiMnTi0.1 high-entropy alloy processed by high-pressure torsion"
    حامد شاهمیر , Mahmoud Nili Ahmadabadi, Ahad Shafiee, T.g Langdon
    IOP Conference Series: Materials Science and Engineering, Vol. 194, No 1, 2017
  45. "A Significant Improvement in the Mechanical Properties of AISI 304 Stainless Steel by a Combined RCSR and Annealing Process"
    Peyman Asghari-rad, Mahmoud Nili Ahmadabadi, Hassan Shirazi, Sebastian Koldorf, Sebastian Koldorf
    ADVANCED ENGINEERING MATERIALS, Vol. 19, No 3, 2016
  46. "Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model"
    Mohammad Amin Moghadasi, Mahmoud Nili Ahmadabadi, Farsad Forghani, Hyoung Seop Kim
    Scientific Reports, Vol. 6, No 1, 2016
  47. "Room Temperature Flow Behavior of Ti Deformed by Equal-Channel Angular Pressing Using Core-Sheath Method"
    Alireza Derakhshandeh, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, Hamed Shahmir
    ADVANCED ENGINEERING MATERIALS, Vol. 19, No 2, 2016
  48. "The analysis of severely deformed pure Fe structure aided by X-ray diffraction profile"
    Nazanin Forouzanmehr, Mahmoud Nili Ahmadabadi, Matthias Bonisch
    PHYSICS OF METALS AND METALLOGRAPHY, Vol. 117, No 6, pp.624-633, 2016
  49. "Evaluation of structure and mechanical properties of Ni-rich NiTi/Kapton composite film"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Mohsen Pouryazdanpanah, Horst Hahn
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 668, No 668, pp.13-19, 2016
  50. "On the Deformation Analysis during RCSR Process Aided by Finite Element Modeling and Digital Image Correlation"
    Saeideh Mirab, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, Mohamad Abshirini, Mohammad Habibi Parsa, Naser Soltani
    ADVANCED ENGINEERING MATERIALS, Vol. 18, No 8, pp.1434-1443, 2016
  51. "Observation of pseudoelasticity in a cold rolled Fe–Ni–Mn martensitic steel"
    Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, Hassan Shirazi, Hadi Ghasemi Nansa, حمیدرضا جعفریان
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 658, No 658, pp.86-90, 2016
  52. "On the microstructure and mechanical properties of severely cold shape rolled Cu"
    Nazanin Forouzanmehr, Mahmoud Nili Ahmadabadi, Mohsen Samadi Khoshkhoo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 650, No 650, pp.264-272, 2016
  53. "Phase transformation and structure of functionally graded Ni–Ti bi-layer thin films with two-way shape memory effect"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim, Terence G Langdon
    SENSORS AND ACTUATORS A-PHYSICAL, Vol. 228, No 228, pp.151-158, 2015
  54. "Microstructure and mechanical behavior of a shape memory Ni–Ti bi-layer thin film"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Julia Ivanisenko, Ruth Schwaiger, Horst Hahn B, Venkata Sai Kiran Chakravadhanula
    Thin Solid Films, Vol. 583, No 583, pp.245-254, 2015
  55. "Crystallization study of amorphous sputtered NiTi bi-layer thin film"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Venkata Sai Kiran Chakravadhanula
    MATERIALS CHARACTERIZATION, Vol. 103, No 103, pp.75-80, 2015
  56. "Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Terence G. Langdon, Chuan Ting Wang, Jai Myun Jung, Hyoung Seop Kim, Terence Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 629, No 629, pp.16-22, 2015
  57. "Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Alireza Razaghi, Mahdi Mohammadi, Terence G. Langdon, Jai Myun Jung, Hyoung Seop Kim, Terence Langdon
    JOURNAL OF MATERIALS SCIENCE, Vol. 50, No 11, pp.4003-4011, 2015
  58. "Thermal behavior of Fe40Co8Cr15Mo13Y2C16B6 bulk metallic glass with reference to irreversible structural relaxation"
    Fat Sae, Mahmoud Nili Ahmadabadi
    MATERIALS LETTERS, Vol. 143, No 143, pp.108-111, 2015
  59. "Functionally Graded Shape-Memory and Pseudoelastic Response in Ni-Rich/Ti-Rich and Vice Versa NiTi Multilayer Thin Films Deposited on Si(111)"
    Maryam Mohry, Mahmoud Nili Ahmadabadi
    JOM, Vol. 67, No 7, pp.1585-1593, 2015
  60. "Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Jai Myun Jung, Yi Huang, Hyoung Seop Kimb , Terence G. Langdon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 626, No 629, pp.203-206, 2015
  61. "Evaluating the Room Temperature ECAP Processing of a NiTi Alloy via Simulation and Experiments"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Mojtaba Mansouri Arani, Ali Khajezadeh, Terence G. Langdon
    ADVANCED ENGINEERING MATERIALS, Vol. 17, No 4, pp.532-538, 2014
  62. "On the Super-Elastic and Phase Transformation of a Novel Ni-Rich/NiTiCu Bi-Layer Thin Film"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Julia Ivanisenko
    ADVANCED ENGINEERING MATERIALS, Vol. 17, No 6, pp.856-865, 2014
  63. "Microstructural Evolution of Semi-Solid Type 304 Stainless Steel Deformed Severely by ECAP"
    Mohsen Toofaninejad, Mahmoud Nili Ahmadabadi, Hasan Shirazi
    Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. 217-218, No 217, pp.99-104, 2014
  64. "Diffusion evaluation of Cu in NiTi Bi-layer thin film interface"
    Maryam Mohry, Mahmoud Nili Ahmadabadi, Stefan Flege
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 594, No 594, pp.87-92, 2014
  65. "Microstructural characteristics and second-phase particles in yttrium-bearing Fe-10Ni-7Mn martensitic steels"
    Farsad Forghani, Mahmoud Nili Ahmadabadi
    JOURNAL OF RARE EARTHS, Vol. 32, No 4, pp.326-333, 2014
  66. "Nano- and Microvoid Formation in Ultrafine-Grained Martensitic Fe-Ni-Mn Steel After Severe Cold Rolling"
    Hadi Ghasemi Nansa, Mahmoud Nili Ahmadabadi, Arya Mirsepasi, Cyrus Zamani
    METALS AND MATERIALS INTERNATIONAL, Vol. 20, No 2, pp.201-205, 2014
  67. "On the subsurface deformation of two different Fe-based bulk metallic glasses indented by Vickers micro hardness"
    Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, Amir Seifoddini
    INTERMETALLICS, Vol. 46, No 46, 2014
  68. "Evaluating a New Core-Sheath Procedure for Processing Hard Metals by Equal-Channel Angular Pressing"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Mojtaba Mansouri Arani, Ali Khajezade, T.g Langdon
    ADVANCED ENGINEERING MATERIALS, Vol. 192, No 193, pp.1-9, 2014
  69. "Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, Yi Huang, Terence G. Langdon
    JOURNAL OF MATERIALS SCIENCE, Vol. 49, No 8, pp.2998-3009, 2014
  70. "Investigating on the reverse transformation of martensite to austenite and Pseudoelastic behavior in Ultrafine-Grained Fe-10Ni-7Mn (wt %) Steel processed by heavy cold rolling"
    Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, Hadi Ghasemi Nansa
    Advanced Materials Research, Vol. 829, No 829, pp.25-29, 2013
  71. "The effect of liquid phase separation on the Vickers microindentation shear bands evolution in a Fe-based bulk metallic"
    Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, Amir Seifoddini
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 585, No 585, pp.363-370, 2013
  72. "Free volume study of severely plastic deformed pure Fe"
    Nazanin Forouzanmehr, Mahmoud Nili Ahmadabadi
    Advanced Materials Research, Vol. 829, No 829, pp.110-114, 2013
  73. "EBSD and DTA Characterization of A356 Alloy Deformed by ECAP During Reheating and Partial Re-melting"
    Marzyeh Moradi, Mahmoud Nili Ahmadabadi, بهرنگ پورگنجی, بشیر حیدریان, تاداشی فوروهارا
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 192, No 192, pp.347-352, 2013
  74. "Effect of equal channel angular pressing on the microstructure and mechanical properties of AISI type 304 austenitic stainless steel"
    Mohsen Toofaninejad, Mahmoud Nili Ahmadabadi
    Advanced Materials Research, Vol. 829, No 829, pp.86-90, 2013
  75. "Development of high Mo carbide free thick section nodular cast iron by partial melting homogenisation"
    Navid Rahgozar, Mahmoud Nili Ahmadabadi, Farsad Forghani
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, Vol. 29, No 11, pp.1346-1353, 2013
  76. "On the flow and mechanical behavior of Al matrix composite reinforced by nickel based (90% Ni-10% Cr) wires during equal channel angular pressing"
    Saeideh Mirab, Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 583, No 583, pp.43-51, 2013
  77. "On the filling of semi-solid during thixocasting"
    Seyed Vahid Seyed Vakili, Mahmoud Nili Ahmadabadi
    Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. 192, No 193, pp.347-352, 2013
  78. "The effect of liquid phase separation on the Vickers micro indentation shear bands evolution in a Fe-based bulk metallic glass"
    Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, Amir Seifoddini
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 585, No 585, pp.363-370, 2013
  79. "The processing of NiTi shape memory alloys by equal-channel angular pressing at room temperature"
    Hamed Shahmir, Mahmoud Nili Ahmadabadi, T.g Langdon, Mojtaba Mansouri-arani
    Biomaterials Advances, Vol. A, No 576, pp.178-184, 2013
  80. "Study of thermomechanical treatment on mechanical - induced phase transformation of NiTi and TiNiCu wires"
    Seyyed Aghamiri Sm , Mahmoud Nili Ahmadabadi, Hamed Shahmir , Fariba Naghdi , Shahram Raygan
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 21, No 1, pp.32-36, 2013
  81. "New (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloys with enhanced glass-forming ability and large compressive strain"
    Amir Seifoddini, Mihai Stoica, Mahmoud Nili Ahmadabadi, Saeid Heshmati Manesh, Uta Kuhn, Jurgen Eckert
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 1, No 560, pp.575-582, 2013
  82. "Microstructural evaluation of austenite reversion during intercritical annealing of Fe–Ni–Mn martensitic steel"
    Hasan Shirazi, Siamak Hossein Nedjad, Hadi Ghasemi Nanesa, T.f Furuhara, Mahmoud Nili Ahmadabadi, G.t Miyamoto
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. in press, 2012
  83. "X-ray diffraction study on the strain anisotropy and dislocation structure of deformed lath martensite"
    Siamak Hossein Nedjad, Hossein Nasiri, Ali Movagar, دامادی, Mahmoud Nili Ahmadabadi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 42, No 42, pp.2493-2497, 2011
  84. "Ductility enhancement in ultrafine-grained Fe-Ni-Mn martensitic steel by stress-induced reverse transformation"
    Hadi Ghasemi Nansa, Mahmoud Nili Ahmadabadi, حسن شیرازی, سیامک حسین نزاد, Seyed Mohammad Hasan Pish Bin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 527, No 527, 2010
  85. "Microstructural Evolution of Bainitic Steel Severely Deformed by Equal Channel Angular Pressing"
    Mahmoud Nili Ahmadabadi, F. Haji Akbari
    International Journal of Nanoscience, Vol. 10, No 10, pp.5986-5993, 2010
  86. "Effect of phase transformation on the wear behavior of NiTi alloy"
    Hamid Reza Ghasemi Monfared Rad, Mahmoud Nili Ahmadabadi, Morteza Abedini, Reza Mahmuodi
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 132, No 132, pp.310101-310105, 2010
  87. "Static and Cyclic Load-Deflection Characteristics of NiTi Orthodontic Archwires Using Modified Bending Tests"
    Mahmoud Nili Ahmadabadi, Tahereh Shahhoseini, Mohammad Habibi Parsa, Maryam Haj-fathalian, Tahereh Hoseinzadeh-nik, Hananeh Ghadirian
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 18, pp.793-796, 2009
  88. "Effect of Slope Plate Variable and Reheating on the Semi - Solid Structure of Ductile Cast Iron"
    Mahmoud Nili Ahmadabadi
    Tsinghua Science and Technology, Vol. 13, No 2, pp.147-151, 2008
  89. "Evaluation of microstructure change and hot workability of high Nickel high strength steel using wedge test"
    Mohammad Habibi Parsa, Mahmoud Nili Ahmadabadi, Hassan Shirazi , Behrang Poorganjib , Payam Pournia
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 199, pp.304-313, 2008
  90. "Use of modeling to optimise homogenization of high Mn heavy section ductile iron castings using partial melting"
    Mahmoud Nili Ahmadabadi, شهاب الدین فقاهتی
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 20, No 2, pp.53-57, 2007
  91. "effect of slope plate variables and reheating on the semi - solid structure of Al alloys"
    S Ashouri , Mahmoud Nili Ahmadabadi
    Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. -, pp.201-204, 2006
  92. "Kinetics of coarsening and solid sphericity during reheating of ductile iron and Al alloys"
    P Babaghorbani , S Salarfar , Mahmoud Nili Ahmadabadi
    Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. -, pp.205-208, 2006
  93. "Evolution of precipitate coarsening reaction in a nanostructured FeNiMn maraging alloy"
    S Hossein Nedjad , Mahmoud Nili Ahmadabadi, Tadashi Furuhara , Tadashi Maki
    Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. -, No 114, pp.159-164, 2006
  94. "Effect of initial microstructure and further thermomechanical processing on microstructural evolution in a Ti - 47Al - 2Cr alloy"
    Hamid Reza Jafarian , Hasan Ghasemiarmaki , Mahmoud Nili Ahmadabadi, Saeid Heshmati Manesh
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 436, pp.200-203, 2006
  95. "High resolution transmission electron microscopy study on the nano - scale twinning of theta - NiMn precipitates in an Fe - Ni - Mn maraging alloy"
    Sh Nedjad , Mahmoud Nili Ahmadabadi, T Furuhara , T Maki
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, Vol. 203, No 9, pp.2229-2235, 2006
  96. "The influence of holding time on temperature eutectic ending, duration o eutectic transformation and chemical composition of ductile iron"
    A Sheikhabdolhossein , Mahmoud Nili Ahmadabadi
    University, Vol. 39, No 6, 2005
  97. "Comparison of hot working behavior and microstructure change of maraging steel grad 300 without Coblat and grad 350 with Cobalt using wedge test"
    بهرنگ پورگنجی , Mohammad Habibi Parsa, پیام پورنیا , Mahmoud Nili Ahmadabadi
    Journal of Financial and Management Engineering Exchange, Vol. 8, No 21, 2005
  98. "Influence of SiC and FeSi addition on the characteristics of gray cast iron melts poured at different temperatures"
    K Edalati , F Akhlaghi , Mahmoud Nili Ahmadabadi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 160, No 2, pp.183-187, 2005
  99. "Fading investigation in ductile cast iron aided by cooling curve analysis"
    Sheykh Abdolhossein , Mahmoud Nili Ahmadabadi
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 5, No 18, pp.295-299, 2005
  100. "Effects of casting process variables on the residual stress in Ni - base superalloys"
    Hasan Farhangi, S Norouzi , Mahmoud Nili Ahmadabadi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 153-154, pp.209-212, 2004
  101. "The Role of Austempering Parameters on the Structure and Mechanical Properties of Heavy Section ADI"
    Mahmoud Heydarzadeh Sohi , Mahmoud Nili Ahmadabadi, Bahrami Vahdat
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 153-154, pp.203-208, 2004
  102. "Effect of subzero treating on the mechanical properties of aged martensitic Fe - 12Ni - XMo alloys"
    H Farhangi , Mahmoud Nili Ahmadabadi, R Mahmudi , S Hossein Nedjad
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 378, pp.314-318, 2004
  103. "Effect of conventional and subzero treating on the mechanical properties of aged martensitic Fe - 12 wt% Ni - X wt % Mn alloys"
    S Hossein Nedjad , Mahmoud Nili Ahmadabadi, R Mahmoudi , Hasan Farhangi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 378, pp.314-318, 2004
  104. "THE EFFECT OF HOLDING TIME ON TEMPERATURE EUTECTIC UNDERCOOLING IN DUCTLIE IRON"
    Sheikh Abdolhossein , Mahmoud Nili Ahmadabadi
    Iranian Journal of Materials Science and Engineering, Vol. 1, No 3, 2004
  105. "Effect of modified heat treatments on the microstructure and mechanical properties of a low alloy high strength steel"
    Ar Mirak , Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 20, No 7, pp.897-902, 2004
  106. "Homogenization of ductile iron using partial melting aided by modeling"
    Mahmoud Nili Ahmadabadi, Mosallaiee Pour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 373, pp.309-314, 2004
  107. "Influence of inoculant and / or SiC addition in characteristics of grey cast iron"
    K Edalati , Farshid Akhlaghi , Mahmoud Nili Ahmadabadi
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 17, No 3, pp.147-151, 2004
  108. "Development of Semi-solis ductile cast iron"
    Pahlevani Farshid , Mahmoud Nili Ahmadabadi
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 17, No 3, pp.157-161, 2004
  109. "Effect of partial melting homogenization on the microstructure of ductile iron"
    Mahmoud Nili Ahmadabadi, - Mosalaie pour
    University, Vol. 37, No 2, 2003
  110. "Effect of Ti addition on the microstructure and mechanical properties of a cast Fe - Ni Mo Mn Maraging steel"
    Nejad S Hossein , Mahmoud Nili Ahmadabadi
    Journal de Physique, Vol. 112, No 1, pp.461-464, 2003
  111. "Transformation kinetics of unalloyed and high Mn austempered ductile iron"
    S Farjami , Mahmoud Nili Ahmadabadi
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 19, No 5, pp.645-649, 2003
  112. "Application of computational thermodynamics and kinetics to control of high Mn ductile iron austempering"
    Mahmoud Nili Ahmadabadi, S Farjami
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 16, pp.71-75, 2003
  113. "Effect of temperature on hot formability of ductile iron in semi solid state"
    Mahmoud Nili Ahmadabadi
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 16, 2003
  114. "Effect of Austempering Variables on the Dimensional Stability of Austempered Ductile"
    Mahmoud Nili Ahmadabadi, M Zarinezhad , M Bahmani
    University, Vol. 34, No 2, 2000
  115. "Effect of Successive Austempering on the Tribological Behavior of Ductile Cast Iron"
    Mahmoud Nili Ahmadabadi, Hr Ghasemi , M Osia
    WEAR, Vol. 231, No 2, pp.293-300, 1999
  116. "A transmission electron microscope study of 1 Pct Mn ductile iron with different austempering treatments"
    Mahmoud Nili Ahmadabadi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 29, No 9, pp.2297-2306, 1998
  117. "Effect of Alloying Elements and Austempering Variables on the Mechanical Properties of Ni - Cu - Mo Ductile Iron"
    Mahmoud Nili Ahmadabadi, Hh Bahrami , M Osia
    University, Vol. 31, No 2, 1998
  118. "Wear Behavior of High Mn Ductile Iron Treated by Different Austempering Processes, to be appeared in the Proc"
    Mahmoud Nili Ahmadabadi, M R Ghasemi , M Osia
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. -, No 4, pp.24-26, 1997
  119. "Effect of Austempering Variables on the Mechanical Properties of Ni - Mn - Cu Austemered Ductile Iron"
    Mahmoud Nili Ahmadabadi, B Abbasi , M Bahmani
    AFS Trans, Vol. 101, 1997
  120. "Effect of Austempering and Tempering on the Microstructure andMechanical properties of 0.5% Mn Ductile Iron"
    Mahmoud Nili Ahmadabadi, M Tabar
    University, Vol. 30, No 2, 1997
  121. "TEM Study of Hight Temperature Bainitic Transformation in 1% Mn Ductile Iron"
    Mahmoud Nili Ahmadabadi, E Niyama , J Echigoya
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. -, No 194, pp.98-87, 1995
  122. "Effect of Graphite Nodule Count and MN Content on successive Austempering process of Austempered Ductile Iron"
    M Saito , Mahmoud Nili Ahmadabadi, T Ohide
    IMMUNOLOGY, Vol. 67, No 2, pp.106-111, 1995
  123. "Transmission electron microscopy study of high temperature bainitic transformation in 1 wt.% Mn ductile iron"
    Mahmoud Nili Ahmadabadi, Nili Echigoya J , E Niyama
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 194, pp.87-98, 1995
  124. "Structural control of 1% Mn ADI aided by modeling of microsegregation"
    Mahmoud Nili Ahmadabadi, E Niyama , T Ohide
    AFS Trans, Vol. -, 1994
  125. "Application of successive austempering process to spheroidal graphite cast iron produced by inmold process"
    T Ohide , Mahmoud Nili Ahmadabadi, S Kawashima
    IMMUNOLOGY, Vol. 66, No 6, pp.430-435, 1994
  126. "Chemical composition and structural identification of eutectic carbide in 1 Pct Mn ductil Iron"
    Mahmoud Nili Ahmadabadi, E Niyama , M Tanino , T Abe , T Ohide
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 25, No 5, pp.911-918, 1993
  127. "Wear behavior of austempered Ductile Iron"
    Mahmoud Nili Ahmadabadi
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 4, No 4, 1991
  128. "Composition and Structural Identification of Eutectic Carbide in 1% Mn Ductile Iron"
    Mahmoud Nili Ahmadabadi, E Niyama , M Tanino , T Abe , T Ohide
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 25, No 5, pp.911-918, 1732
  129. "Combined effects of different heat treatments and Cu element on transformation behavior of NiTi orthodontic wires"
    Seyed Mohammad Seyyed Aghamiri , Mahmoud Nili Ahmadabadi, Shahram Raygan
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 4, No 3, pp.298-302, 1732
  130. "On the spinodal decompositon phenomena in a Ni-Al alloy system aided by thermodynamic calculaton"
    Farsad Forghani, Mahmoud Nili Ahmadabadi, Reza Abbaschian, Hamid Asadi
    Metallurgical Engineering, Vol. 20, No 2, pp.72-82, 2017
  131. "The Effect of "Repetitive Corrugation and Straightening by Rolling" (RCSR) Process above Md30 temperature on the Microstructure of 304 stainless steel"
    Shima Ahmadzadeh Salout, Mahmoud Nili Ahmadabadi, Hassan Shirazi
    metallurgy and materials engineering, Vol. 20, No 1, pp.15-25, 2017
  132. "The effect of interface thickness on shape memory and superelastic behavior of NiTi bi-layer composite"
    Sepideh Sadat Hosseini Noorabadi, Mahmoud Nili Ahmadabadi
    metallurgy and materials engineering, Vol. 19, No 4, pp.249-259, 2016
  133. "Semi-Solid Microstructural Evoluton of Severely Deformed AISI 304 Stainless Steel"
    Peyman Asghari-rad, Mahmoud Nili Ahmadabadi, Hassan Shirazi
    Metallurgical Engineering, Vol. 19, No 1, pp.6-20, 2016
  134. "بررسی اثر حافظه داری بر روی سطح سایش آلیاژ حافظه دار NiTi"
    مرتضی عابدینی اکارزواره , Hamid Reza Ghasemi Monfared Rad, Mahmoud Nili Ahmadabadi
    Journal of Financial and Management Engineering Exchange, Vol. -, 2009
  135. "دگرگونی های فازی و ریزساختارهای ناشی از آ نها در آلیاژ Ti - 47Al - 2Cr"
    حسن قاسمی ارمکی , Saeid Heshmati Manesh, حمیدرضا جعفریان , Mahmoud Nili Ahmadabadi
    University, Vol. 41, No 8, pp.1073-1080, 2008
  136. "Overview of phase transformation in intermetallic alloys based on gamma-TiAl"
    حسن قاسمی ارمکی , Saeid Heshmati Manesh, حمیدرضا جعفریان , Mahmoud Nili Ahmadabadi
    engineering, Vol. 2, No 25, pp.59-50, 2007
  137. "بررسی تاثیر زمان نگهداری بر ترکیب شیمیائی. دمای خاتمه و مدت زمان استحاله یوتکتیک در چدن نشکن"
    علیرضا شیخ عبدالحسین , Mahmoud Nili Ahmadabadi
    University, Vol. -, pp.821-829, 2006
  138. "تاثیر تنش اعمالی و عملیات حراراتی روی رفتار خزش در دمای محیط فولاد پر استحکام AISI 4140"
    حمید رضا کیایی , Hasan Farhangi, Mahmoud Nili Ahmadabadi, حمید رضا کیایی
    engineering, Vol. -, pp.37-42, 2006
  139. "وابستگی کمی بین بازو های دندریتی و گلبولها دریزساختار آلیاژ A356 ریخته گری شده در حالت نیمه جامد - نیمه مایع"
    سیدمحمد باقر خواجه باشی , Farshad Akhlaghi, Mahmoud Nili Ahmadabadi
    engineering, Vol. 8, No 22, pp.2-6, 2005
  140. "مقایسه رفتار کار گرم و تغییر ریز ساختار فولادهای ماراجینگ بدون کبالت رده 300 و کبالت دار رده 350 با استفاده از آزمایش کوه"
    پیام پورنیا , Mohammad Habibi Parsa, بهرنگ پورگنجی , Mahmoud Nili Ahmadabadi
    engineering, Vol. 8, No 21, 2005
  141. "The effect of production parameters on microstructure of A356 alloy cast in a semi-solid - liquid half"
    Mahmoud Nili Ahmadabadi, خواجه باشی
    Casting, Vol. -, No 80, 2005
  142. "Effect of production parameters on microstructure of A356 alloy cast in a semi-solid - liquid half"
    سید محمد باقر خواجه باشی , Farshad Akhlaghi, Mahmoud Nili Ahmadabadi
    Casting, Vol. -, No 3, pp.44-50, 2005
  143. "مروری بر تشکیل و میرائی گرافیتهای کروی در چدن نشکن"
    علیرضا شیخ عبدالحسین , Mahmoud Nili Ahmadabadi
    Casting, Vol. 25, No 77, pp.22-43, 2004
  144. "تاثیر عوامل مختلف بر ریز ساختار آلومینیم و چدن نشکن نیمه جامد در روش سطح شیبدار"
    فرشید پهلوانی , سحر سالارفر , Mahmoud Nili Ahmadabadi
    Casting, Vol. 25, No 76, 2004
  145. "مطالعه تأثیر زمان و دمای آستمپرینگ بر روی چدن نشکن با مقطع ضخیم"
    Mahmoud Heydarzadeh Sohi, عباس بهرامی وحدت , Mahmoud Nili Ahmadabadi
    Casting, Vol. 20, No 62, pp.13-18, 1999
  146. "نق عناصر آلیاژی و و عملیات حرارتی پی در پی بر خواص مکانیکی چدن نشکن"
    Mahmoud Nili Ahmadabadi, مهدی اوصیاء , حسین حاجی بهرامی
    University, Vol. 31, No 2, pp.91-98, 1998
  147. "تاثر عملیات حرارتی آستمپرینگ و بازپخت بر ریز ساختار و خواص مکانیکی چدن نشکن 0/5 %wt منگنز"
    داود محمد تبار کاسگری , Mahmoud Nili Ahmadabadi
    University, Vol. 30, No 2, pp.19-28, 1997

Conference Paper

  1. "hydrogen storage properties in heavily deformed pure mg by ecap at room temperature"
    Mahmoud Nili Ahmadabadi, Maryam Mehri
    31th international conference on metallurgy and materials, 2022
  2. "Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel"
    Hamidreza Koohdar, Hamidreza Jafarian, Faezeh Javadzadeh Kalahroudi, Mahmoud Nili Ahmadabadi, T.g Langdon, Yi Huang
    6th International Biennial Conference on Ultrafne Grained and Nanostructured Materials, 2017
  3. "Fine grained 304 ASS processed by a severe plastic deformation and subsequent annealing; microstructure and mechanical properties evaluation"
    Shima Ahmadzadeh, Hassan Shirazi, Mahmoud Nili Ahmadabadi
    6TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS: (UFGNSM2017), 2017
  4. "The Effect of "Repetitive Corrugation and Straightening by Rolling" (RCSR) Process on the Semi-solid Microstructure of A356 Aluminum Alloy"
    Peyman Asghari-rad, Mahmoud Nili Ahmadabadi, Hassan Shirazi
    Proceedings of Iran International Aluminum Conference (IIAC2016), 2016
  5. "Microstructure evolution of an Austenitic Stainless Steel severely deformed by the repetitive corrugation and straightening by rolling and subsequent annealing"
    Peyman Asghari-rad, Hassan Shirazi, Sebastian Koldorf, Mahmoud Nili Ahmadabadi
    5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, 2015
  6. "On the filling of semi-solid during thixocasting"
    Seyed Vahid Seyed Vakili, Mahmoud Nili Ahmadabadi
    12th International Conference on Semi-Solid Processing of Alloys and Composites, 2012
  7. "Mechanical properties of Fe -10Ni -7Mn martensitic steel subjected to severe plastic deformation via cold rolling and wire drawing"
    Mahmoud Nili Ahmadabadi, Hadi Ghasemi Nansa, حسن شیرازی
    15th International Conference on the Strength of Materials, ICSMA 15, 2009
  8. "microstructural 403 stainless steel changes through the ECAP process at room temperature"
    Mohsen Toofaninejad, Mahmoud Nili Ahmadabadi
    Second International Conference of the Seventh Joint Conference on Metallurgical Engineering Society Foundry, 2013
  9. "Comparative abrasion of"
    Ahad Shafie, Mahmoud Nili Ahmadabadi, Hamid Reza Ghasemi Monfared Rad, Asadolah Eslami, Ehsan Hosien Mirzaie
    IMES, 2012
  10. "Improved vitrification and mechanical properties of Fe 1.5 Ni alloy"
    Amir Seifoddini, Mahmoud Nili Ahmadabadi, Saeid Heshmati Manesh
    IMES, 2012
  11. "Effect of yttrium on the primary austenite grain growth"
    Mahmoud Nili Ahmadabadi, Farsad Forghani, Elham Montakhab
    IMES, 2012
  12. "Effect of thermal annealing on the mechanical behavior of an iron-based bulk metallic glass"
    Nilofar Habibi, Mahmoud Nili Ahmadabadi, Amir Seifoddini
    imes, 2012
  13. "changes microstructural NiTi memory alloy through ECap process at room temperature"
    Mojtaba Mansouri Arani, Mahmoud Nili Ahmadabadi, Hamed Shahmir, Terry Langdon
    IMES, 2012