Mahmoud Sarkari Khorami

Journal Paper

1. "Surface alloying of H13 tool steel by Al2CrFeCoCuTiNi2 high-entropy alloy using tungsten-inert gas process under various substrate initial temperatures"
   yoosof Moradipour, Mahmoud Sarkari Khorami, Seyed Farshid Kashani Bozorg
   MATERIALS SCIENCE AND TECHNOLOGY, Vol. -, 2025
2. "Fabrication of AA6061/AlCoCrFeNi high-entropy alloy surface composite through flame spraying and friction stir processing"
   Ehsan Aali, Nasrin Rabiei, Mahmoud Sarkari Khorami, Reza Soltani
   MATERIALS CHEMISTRY AND PHYSICS, Vol. 333, 2025
3. "In-situ composite formation of vanadium carbide in CrFeCoNiCu high-entropy alloy cladded on AISI304 stainless steel"
   seyed saeid Hosaini, Mahmoud Sarkari Khorami, Mahmoud Heydarzadeh Sohi
   Journal of Materials Research and Technology-JMR&T, Vol. 35, pp.3333-3340, 2025
4. "Effect of molybdenum content on the microstructural characteristic of surface cladded CoCrFeNi high entropy on AISI420 martensitic stainless steel"
   Marzieh Askari, Mahmoud Sarkari Khorami, Mahmoud Heydarzadeh Sohi
   Materials Today Communications, Vol. 43, 2025
5. "Tribological behavior and characteristics of TIG surface cladded AlCoCrFeNi high-entropy alloy on 304L stainless steel"
   Faezeh Semnani, Mahmoud Sarkari Khorami, Hamid Reza Ghasemi Monfared Rad, Mahmoud Heydarzadeh Sohi
   SURFACE & COATINGS TECHNOLOGY, Vol. 489, 2024
6. "In-situ synthesis of TiC/Ti alloyed layer via pulsed Nd:YAG laser melting of Ti-6Al-4V titanium with preplaced carbon-based powder"
   Hassan Ghorbani, Mahmoud Sarkari Khorami, Ali Geranmayeh, Mahmoud Heydarzadeh Sohi
   OPTICS AND LASERS IN ENGINEERING, Vol. 172, No 1, 2023
7. "Friction stir welding of AA5010 aluminum alloy to St-12 carbon steel using CoCrCuFeNi high entropy alloy interlayer"
   Saeed Manouchehri, Mahmoud Sarkari Khorami
   Journal of Manufacturing Processes, Vol. 99, No 1, pp.298-309, 2023
8. "On the formation of large grain structure after friction stir processing of ultrafine-grained aluminium alloy"
   Mahmoud Sarkari Khorami, Nobou Saito
   PHILOSOPHICAL MAGAZINE, Vol. 103, No 8, pp.1-16, 2023
9. "Fabrication of FexCoCrAlNi medium and high entropy layers on a carbon steel through TIG cladding"
   Pedram Sorouri Mirazizi, Mahmoud Sarkari Khorami, Mahmoud Heydarzadeh Sohi
   MATERIALS CHEMISTRY AND PHYSICS, Vol. 290, No 1, 2022
10. "Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys"
    Zahra Nasiri, Hamed Mirzadeh Soltanpour, Mahmoud Sarkari Khorami, Massoud Emamy
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 21, No 3, 2021
11. "Friction stir welding of ultrafine grained aluminum alloys: a review"
    Mahmoud Sarkari Khorami
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 54, No 1, pp.1-20, 2021
12. "Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing"
    Zahra Nasiri, Mahmoud Sarkari Khorami, Hamed Mirzadeh Soltanpour, Massoud Emamy
    MATERIALS LETTERS, Vol. 296, No 1, 2021
13. "Liquid phase cladding of AlxCoCrFeNi high entropy alloys on AISI 304L stainless steel"
    Mohammad Fereidouni, Mahmoud Sarkari Khorami, Mahmoud Heydarzadeh Sohi
    SURFACE & COATINGS TECHNOLOGY, Vol. 402, No 1, 2020
14. "Improved properties of dual-phase steel via pre-intercritical annealing treatment and thermal cycling"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour, Mahmoud Sarkari Khorami, Reza Soltani, Zahra Nasiri
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 36, No 15, pp.1663-1670, 2020
15. "Dissimilar resistance spot welding of 6061-T6 aluminum alloy/St-12 carbon steel using a high entropy alloy interlayer"
    Hamed Azhari saray, Mahmoud Sarkari Khorami, Azadeh Nademi-Babahadi, Seyed Farshid Kashani Bozorg
    INTERMETALLICS, Vol. 124, No 1, 2020
16. "Texture and strain-induced abnormal grain growth in cryogenic friction stir processing of severely deformed aluminum alloy"
    Mahmoud Sarkari Khorami, Nobou Saito, Yukio Miyashita
    MATERIALS CHARACTERIZATION, Vol. 151, No 1, pp.378-389, 2019
17. "Texture variations and mechanical properties of aluminum during severe plastic deformation and friction stir processing with SiC nanoparticles"
    Mahmoud Sarkari Khorami, Nobou Saito, Yukio Miyashita, Mizuki Kondo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 744, No 1, pp.349-364, 2019
18. "Post Deformation at Room and Cryogenic Temperature Cooling Media on Severely Deformed 1050-Aluminum"
    Mahmoud Sarkari Khorami, Mohsen Kazeminezhad
    METALS AND MATERIALS INTERNATIONAL, Vol. 24, No 2, pp.401-414, 2018
19. "Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing"
    Mahmoud Sarkari Khorami, Mahdi Khoobi, Massimiliano Vitali, Reza Kazemizad
    International Journal of Minerals Metallurgy and Materials, Vol. 24, No 3, pp.297-308, 2017
20. "The Correlation of Stir Zone Texture Development with Base Metal Texture and Tool-Induced Deformation in Friction Stir Processing of Severely Deformed Aluminum"
    Mahmoud Sarkari Khorami
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 48, No 1, pp.188-197, 2016
21. "Multiple regression analysis between key variables of direct laser deposition process and geometry of Inconel 718 superalloy clads on 316 stainless steel substrate"
    Milad Karimi, Mahmoud Sarkari Khorami, Ghasem Azimiroeen, Seyed Farshid Kashani Bozorg
    Metallurgical Engineering, Vol. 27, No 1, pp.52-61, 2024
22. "Control of microstructure and solidification cracks in laser powder bed fusion additive manufacturing of high-strength aluminum alloys"
    Arya Gandomdoust, Mahmoud Sarkari Khorami, Seyed Farshid Kashani Bozorg, Hassan Ghorbani
    Journal of Welding Science and Technology of Iran, Vol. 9, No 1, pp.38-57, 2023
23. "Evaluation of the performance of abrasive nano and micro alumina particles in automotive paint polishing process"
    نفیسه میرآخورلو, Mahmoud Sarkari Khorami, محمدعلی سنجری شهرضائی
    nanomeghyas, Vol. 9, No 2, pp.1-6, 2022
24. "The Effect of SiC Nanoparticle s and Liquid Nitrogen Medium on Microstructure Evolutions of Seve rely Deformed Al During Friction Stir Processing"
    Mahmoud Sarkari Khorami, محسن کاظمی نژاد, امیرحسین کوکبی
    Mateials and advanced technology journal, Vol. 5, No 4, pp.1-9, 2017

Conference Paper

1. "The effect of chloride fluxes of AZ61 magnesium alloy welded by Activated Tungsten Inert Gas Welding (A-TIG)"
   Amin Afsharipour, Mahmoud Sarkari Khorami, Ayyub Halvaee
   13th international conference on materials engineering and metallurgy 2024, 2024
2. "Investigation of the mechanical and microstructural homogeneity of the Wire-Arc additively Manufactured H13 Tool Steel"
   Hesam Razavi, Mahmoud Sarkari Khorami, Mahmoud Nili Ahmadabadi
   13th international conference on materials engineering and metallurgy 2024, 2024
3. "Wire arc additive manufacturing Ti-based alloys and High Entropy alloys"
   Abolfazl Asgharzadeh Moalem, Omid Ghadimpour, Amin Afsharipour, Mahmoud Sarkari Khorami, Hamed Jamshidi Aval
   12th international conference on materials science and metallurgical engineering 2023, 2023
4. "The Surface Modification of Hot-Work Tool Steel AISI H13 by TIG Remelting Incorporating Carbides and Their Relations to Wear Behavior"
   Mohammad Amin Khodadadi, Mahmoud Sarkari Khorami, Seyed Farshid Kashani Bozorg
   12th international conference on Materials Science and Metallurgical Engineering 2023, 2023
5. "Investigating the dissimilar resistance spot welding of low carbon austenitic stainless steel 304 and martensitic stainless steel 420"
   Abolfazl Asgharzadeh Moalem, Mahmoud Sarkari Khorami
   9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, 2023
6. "The effect of heat input of TIG cladding with high entropy alloy filler metal on surface alloying of H13 tool steel"
   [] [], Mahmoud Sarkari Khorami
   4th International Conference on Welding and Non Destructive Testing, 2022
7. "Examination of microstructure and mechanical properties of dissimilar metals welding of ferritic stainless steel and plain carbon steel"
   محمد علی مصطفایی, Mahmoud Sarkari Khorami, حسام پورعلی اکبر, Amirhossein Kokabi
   4th Joint Conference of Iranian Society of Metallurgical Engineers and the Scientific Community of Casting, 2010