Journal Paper

1. "Analysis of Vibratory Stress Relief (VSR) Parameters on Mechanical and Metallurgical Properties of AISI 1008"
   Mehdi Jafari Vardanjani, Alireza Araee
   PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, Vol. 68, No 2, pp.149-161, 2024
2. "Experimental Investigations and Modeling of Tool Wear in Gun-Drilling Process of 37Cr4 Forge Steel, Using Artificial Neural Network with Taguchi Method"
   Amir Rezazadeh, Alireza Araee, Ahad Gholipoor
   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 74, No 1, pp.195-203, 2020
3. "Plateau honing of a diesel engine cylinder with special topography and reasonable machining time"
   babak sadezadeh, Alireza Araee, samad Nadimi Bavil Oliaei, vahid Rezaeizad Farshi
   TRIBOLOGY INTERNATIONAL, Vol. 146, No 34, 2020
4. "Influence of Shunting Current on the Metallurgical and Mechanical Behaviour of Resistance Spot-welded Joints in AA2219 Joints"
   Mehdi Jafari Vardanjani, Alireza Araee, Jacek Senkara, Majid Sohrabian, Roozbeh Zarandooz
   STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol. 62, No 11, pp.625-635, 2016
5. "Theoretical analysis of shunting effect in resistance spot welding (RSW) of AA2219"
   Mehdi Jafari, Alireza Araee, J. Senkara, J. Jakubowski, J. Godek
   JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, Vol. 39, No 8, pp.907-918, 2016
6. "Metallurgical Effects of Shunting Current on Resistance Spot-Welded Joints of AA2219 Sheets"
   M. Jafari Vardanjan, Alireza Araee, J. Senkara, J. Jakubowski, J. Godek
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 25, No 8, pp.3506-3517, 2016
7. "Experimental and numerical analysis of shunting effect in resistance spot welding of Al2219 sheets"
   Mehdi Jafari, Alireza Araee, تسویوشی ساکایی , David J. Zajac, Mauricio Sacchi
   Bulletin of the Polish Academy of Sciences-Technical Sciences, Vol. 64, No 2, pp.425-434, 2016
8. "Evaluation of wear and corrosion resistance of pure Mg wire produced by friction stir extrusion"
   Reza Abdi Behnagh, Alireza Araee
   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 2, No 25, pp.1847-1855, 2015
9. "Effect of SiC particles dispersion on the grain size and mechanical properties of Cu/SiC matal matrix nano-composites produced via FSP"
   Mohammad Barmouz, Alireza Araee
   Journal of Nano Research, Vol. 26, No 26, pp.53-58, 2013
10. "Shunting Effect in Resistance Spot Welded (RSW) Joints of Aluminum Alloys 2219"
    Mehdi Jafari Vardanjani, Alireza Araee
    Amirkabir Journal of Mechanical Engineering, Vol. 45, No 4, pp.1-14, 2017
11. "Investigation of effective characteristic on fatigue in welding joints and improving of strength of fatigue"
    Alireza Araee
    مهندسی جوش, Vol. 16, No 45, pp.2-10, 2014
12. "Design assembly system for variation product development"
    Pouyan Ghabezi, Alireza Araee
    Iranian Journal of Mechanical Engineering,, Vol. 22, No 90, pp.64-75, 2013

Conference Paper

1. "Evaluation of Cooling High Temperature Electronic Devices with FEM and Experimental Method"
   Alireza Araee, Mohammad Ali Fathi, Ahmadreza Farokhi
   The Biennial international conference on experimental solid mechanics, 2016
2. "Investigate of Flux Cored Arc Welding On Steel St-52 Using Experimental Method"
   Alireza Araee, Mohammad Ali Fathi, Ahmadreza Farokhi
   The Biennial international conference on experimental solid mechanics, 2016
3. "Investigation of Flux Cored Arc Welding on Steel Using Experimental Method"
   Alireza Araee, ALI FATHISAGI
   X-Mech, 2016
4. "A Review of Finite Element Analysis of Resistance Spot Welding"
   Alireza Araee
   57th international welding conference, 2015
5. "A Review of Shunting Effecte in Resistance Spot Welding"
   Alireza Araee, MAHDI JAFARI
   57th international welding conference, 2015
6. "the brazing of AL 6061-t6 honeycomb panel base on retort furnace method used for small satellites reinforcement structure"
   Sam Rasolzadeh, Alireza Araee
   2014 international conference on brazing and special joinig tecknology, 2014
7. "Effect of SiC Particles Dispersion on the Grain Size and Mechanical Properties of Cu/SiC Metal Matrix Nano-Composites Produced via MFSP"
   Alireza Araee
   dsl, 2013
8. "Experimental investigations and modeling of tool wear in gun-drilling process of 37Cr4 forge steel, using artificial neural network with Taguchi method"
   [] [], Alireza Araee
   ICME2022, 2022
9. "Hot metal forming of A356 in semi-solid state"
   Abbas Zarei Hanzki, علیرضا همتی, Massoud Emamy, Alireza Araee, غلامرضا ابراهیمی
   5th international conference in manufacturing and production in IRAN, 2003