Mohammad Najafi

Journal Paper

1. "Eco-friendly synthesis of non-isocyanate polyurea using PET and CO2 upcycling: A double green approach"
   Behrooz Shojaei, Mohammad Najafi
   POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 35, No 9, pp.1-12, 2024
2. "Exploring bimodal HDPE synthesis using single- and dual-site metallocene catalysts: a comprehensive review of the Monte Carlo method and AI-based approaches"
   Ramin Bairami, Mohammad Najafi, Reza Zarghami
   JOURNAL OF POLYMER RESEARCH, Vol. 31, No 3, pp.1-33, 2024
3. "A comparative Monte Carlo simulation of HDPE synthesis with bimodal molecular weight distribution: evaluating slurry and solution processes using dual-site metallocene catalyst"
   Ramin Bairami, Mohammad Najafi, Reza Zarghami
   MOLECULAR SIMULATION, Vol. 50, No 4, pp.1-20, 2024
4. "An exact and vigorous kinetic Monte Carlo simulation to determine the properties of bimodal HDPE synthesized with a dual-site metallocene catalyst"
   Ramin Bairami, Mohammad Najafi, Reza Zarghami
   JOURNAL OF MOLECULAR GRAPHICS & MODELLING, Vol. 126, No 2024, 2024
5. "Sustainable and low-cost cellulose aerogel-based absorber for solar steam generation"
   Mahsa Mohsenpour, Siyamak Motahari, Fariba Tajabadi, Mohammad Najafi
   APPLIED THERMAL ENGINEERING, Vol. 231, No 120883, 2023
6. "A review on the applications of polyurea in the construction industry"
   Behrouz Shojaei, Mohammad Najafi, Amirhosein Yazdanbakhsh, Mojtaba Abtahi, Chunwei Zhang
   POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 32, No 8, pp.2797-2812, 2021
7. "Preparation and application of sunlight absorbing ultra-black carbon aerogel/graphene oxide membrane for solar steam generation systems"
   Mahsa Mohsenpour, Siyamak Motahari, Fariba Tajabadi, Mohammad Najafi
   RSC Advances, Vol. 10, No 68, pp.41780-41790, 2020
8. "Chemical recycling of PET : A stepping‐stone toward sustainability"
   Behrouz Shojaei, Mojtaba Abtahi, Mohammad Najafi
   POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 1, No 1, pp.1-27, 2020
9. "Synthesis and characterization of end-functionalized solution polymerized styrene-butadiene rubber and study the impact of silica dispersion improvement on the wear behavior of the composite"
   Majid Hasan-abadi, Mohammad Najafi, Ghodratollah Hashemi Motlagh, Sadaf Saeedi Garakani
   POLYMER TESTING, Vol. 85, No 1, 2020
10. "A New Monte Carlo Simulation of Low-Density-Polyethylene Polymerization for Prediction of its Microstructure as a Result of Various Process Conditions"
    Ahmad reza Taheri, Mohammad Najafi, Siyamak Motahari
    Journal of Macromolecular Science Part B-Physics, Vol. 4, No 1, pp.1-22, 2020
11. "Prediction of branch on branch and topological characteristics of low‐density polyethylene polymerization by a novel stochastic approach"
    Ahmad reza Taheri, Mohammad Najafi, Siyamak Motahari
    POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 31, No 3, 2020
12. "A detailed description of methyl methacrylate free radical polymerization using different heating policies under isothermal and non-isothermal conditions: a kinetic Monte Carlo simulation"
    Ramin Bairami, Mohammad Najafi, Peyman Mostafaei, Behrouz Shojaei
    INTERNATIONAL JOURNAL OF MODELLING AND SIMULATION, Vol. 1, No 1, pp.1-19, 2019
13. "An investigation into resorcinol formaldehyde carbon aerogel/epoxy coatings: Exploring mechanical properties, ultraviolet stability, and corrosion resistance"
    Mehdi Naderi, Mohammad Agha bararpour, Mohammad Najafi, Siyamak Motahari
    POLYMER COMPOSITES, Vol. 1, No 1, pp.1-13, 2019
14. "A study on resorcinol formaldehyde carbon aerogel/epoxy nanocomposites: the effect of carbon aerogel pyrolysis time"
    Mohammad Agha Bararpour, Mehdi Naderi, Siyamak Motahari, Mohammad Najafi
    JOURNAL OF POLYMER RESEARCH, Vol. 26, No 3, pp.1-8, 2019
15. "Reinforcing effect of amine-functionalized and carboxylated porous graphene on toughness, thermal stability, and electrical conductivity of epoxy-based nanocomposites"
    Mehdi Naderi, Farnaz Ebrahimi, Mohammad Najafi, Hamed Naderi
    JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 1, No 1, 2019
16. "The impacts of feed fraction on copolymer microstructure in ATRcP: a kinetic Monte Carlo simulation"
    Sahand Serajian, Mohammad Najafi, Anahita Amiri
    INTERNATIONAL JOURNAL OF MODELLING AND SIMULATION, Vol. 1, No 1, pp.1-14, 2018
17. "Reversible addition fragmentation chain transfer polymerization of styrene from the edge of graphene oxide nanolayers"
    Khezrollah Khezri, Mohammad Najafi, Hossein Roghani Mamaqani
    JOURNAL OF POLYMER RESEARCH, Vol. 24, No 3, pp.1-12, 2017
18. "Thermal, mechanical, and acoustic properties of silica-aerogel/UPVC composites"
    Navid Eskandari, Siyamak Motahari, Zhaleh Atoufi najafabadi, Ghodratollah Hashemi Motlagh, Mohammad Najafi
    JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 134, 2016
19. "Confinement effect of graphene nanoplatelets on atom transfer radical polymerization of styrene: grafting through hydroxyl groups"
    Hossein Roghani Mamaqani, Vahid Haddadi-Asl, Khezrollah Khezri, Mehdi Salami Kalajahi, Mohammad Najafi, Masoud Sobani, Seyyed Ataollah Mirshafiei Langari
    IRANIAN POLYMER JOURNAL, Vol. 24, No 1, 2014
20. "Kinetic study of styrene atom transfer radical polymerization from hydroxyl groups of graphene nanoplatelets: Heterogeneities in chains and graft densities"
    Hossein Roghani Mamaqani, Vahid Haddadi-Asl, Khezrollah Khezri, Mehdi Salami Kalajahi, Mohammad Najafi
    POLYMER ENGINEERING AND SCIENCE, Vol. 55, No 8, pp.1720-1732, 2014
21. "Effect of Loading and Surface Modification of Nanoparticles on the Properties of PMMA/Silica Nanocomposites Prepared via In-Situ Free Radical Polymerization"
    Mehdi Salami Kalajahi, Vahid Haddadi-Asl, Saeed Rahimi, Farid Behboodi- Sadabad, Hossein Roghani Mamaqani, Mohammad Najafi
    International Journal of Polymeric Materials and Polymeric Biomaterials, Vol. 62, No 6, pp.336-344, 2013
22. "A simulation of kinetics and chain length distribution of styrene FRP and ATRP: Chain-length-dependent termination"
    Mohammad Najafi, Hossein Roghani Mamaqani, Vahid Haddadi Asl, Mehdi Salami Kalajahi
    ADVANCES IN POLYMER TECHNOLOGY, Vol. 30, No 4, pp.257-268, 2011
23. "An exhaustive study of chain-length-dependent and diffusion-controlled free radical and atom-transfer radical polymerization of styrene"
    Mohammad Najafi, Hossein Roghani Mamaqani, Mehdi Salami Kalajahi, Vahid Haddadi Asl
    JOURNAL OF POLYMER RESEARCH, Vol. 18, No 6, pp.1539-1555, 2011
24. "A comprehensive Monte Carlo simulation of styrene atom transfer radical polymerization"
    Mohammad Najafi, Hossein Roghani Mamaqani, Mehdi Salami Kalajahi, Vahid Haddadi Asl
    Chinese Journal of Polymer Science (English Edition), Vol. 28, No 4, pp.483-497, 2010
25. "Application of the Monte Carlo simulation method to the Investigation of the effect of chain-length-dependent bimolecular termination on ATRP"
    Mohammad Najafi, Vahid Haddadi Asl, Mehdi Salami Kalajahi, Hossein Roghani Mamaqani
    E-POLYMERS, Vol. 9, No 1, 2009
26. "QUANTITATIVE EVALUATION OF ARRANGEMENT OF MONOMERS IN LINEAR BINARY COPOLYMERS USING A MONTE CARLO SIMULATION METHOD"
    Mohammad Najafi, Mehdi Salami Kalajahi, Vahid Haddadi Asl
    Chinese Journal of Polymer Science (English Edition), Vol. 27, No 2, 2009

Conference Paper

1. "Carbon Nanoparticle-Cellulose Microfiber Porous Structure: Integrated Light-Absorber, Heat-Insulator and Water-Supplier of Solar Steam Generation System"
   Mahsa Mohsenpour, Fariba Tajabadi, Mohammad Najafi
   16th International Seminar on Polymer Science and Technology, 2024
2. "Copolymerization of Ethylene and Higher Olefin By MgCl2 Adduct Supported Metallocene Catalyst"
   Amir Hossein Abed, Mohammad Najafi, Saeed Ahmadjo, Mohammad Mehdi Mortazavi
   16th International Seminar on Polymer Science and Technology, 2024
3. "An Improvement in Mechanical Properties of Epoxy Coating Cured by Different Synthetic Hardeners"
   Mehdi Naderi, Morteza Hossein-abadi, Mohammad Najafi, Siyamak Motahari, Mohammad Shokri
   The 5th International Congress on Transportation, Traffic, and Safety, 2016
4. "An Investigation of Mechanical and Morphological Properties of Epoxy Coating Resin; Modified by Reactive Diluent and Porous Graphene"
   Mehdi Naderi, Morteza Hossein-abadi, Mohammad Najafi, Siyamak Motahari, Mohammad Shokri
   The 5th International Congress on Transportation, Traffic, and Safety, 2016
5. "Compressive Strength If Rigid Polyurethane Foam Using Nanoporous Graphenemprovement o"
   Morteza Hossein-abadi, Mehdi Naderi, Mohammad Najafi, Siyamak Motahari, Alimorad Rashidi
   12th International Seminar on Polymer Science and Technology, 2016
6. "Mechanical Properties Improvement of Epoxy Coating Cured by Synthetic Hardeners Using Nonporous Graphene"
   Mehdi Naderi, Morteza Hossein-abadi, Mohammad Najafi, Siyamak Motahari, Mohammad Shokri
   12th International Seminar on Polymer Science and Technology, 2016
7. "Molecular Weight Distribution Evolution in FRcP and ATRcP When Feed Composition Varies"
   Anahita Amiri, Mohammad Najafi
   12th International Seminar on Polymer Science and Technology, 2016
8. "Simulation of Randomizer Agent Effect on Styrene Incorporation in Copolymer Chain for Solution Polymerization of SBR"
   Majid Hasan-abadi, Mohammad Najafi
   12th International Seminar on Polymer Science and Technology, 2016
9. "How Does Feed Composition Affect Reactants in ATRcP: A Monte Carlo Simulation"
   Anahita Amiri, Mohammad Najafi
   12th International Seminar on Polymer Science and Technology, 2016
10. "Ethylene Polymerization Using TiCp2Cl2 Metallocene Catalyst Supported on MgCl2 Adduct"
    Amir Hossein Abed, Mohammad Najafi, سعید احمدجو , Mohammad Mehdi Mortazavi
    7th National Seminar on Polymer, 2023